background image

4

English

 

WARNING  

Observe in order to prevent fires, electric shocks or severe injury.

 

„

Immediately turn off and unplug the unit if there are any signs of abnormality or damage

Examples of abnormality or damage

• The unit does not operate even if the switch is turned on.

Current passes through the cord only sometimes if the cord is moved.

There are abnormal sounds or vibrations during operation.

The casing of the unit has deformed or is abnormally hot.

• There is a burnt smell. (Malfunctioning, an electric shock, smoke, fire, etc., may result if the abnormality is not

addressed and the unit continues to be used)

Contact the place of purchase.

 

CAUTION  

Observe in order to prevent short circuiting, injury or property damage.

 

„

During use

Small children or immobile persons (due to illness or injury) should not operate the

unit by themselves.

For EU:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without

supervision.

For other than EU:

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

 

Children should be supervised to ensure that they do not play with the appliance.

 

Persons who are heavily intoxicated or have taken sleep medication should not operate the unit.

(An electric shock, injury or poor health may result)

Do not use products, such as cosmetics, that contain fine powder, near the unit.

(An electric shock or malfunctioning may result)

Do not operate the unit when fumigating insecticide is in use.

 

After using insecticide, make sure to sufficiently ventilate the room before operating the unit.

(Harm may be caused to health from an outflow of accumulated chemical compounds from the outlet)

Do not use near a smoke detector.

 

If out flowing air flows in the direction of a smoke detector, the response of the smoke detector may be delayed or it

may fail to detect smoke.

Frequently ventilate the room when using the unit together with combustion-based

heating devices.

 

Usage of this product is not a substitute for ventilation. (Potential cause of carbon monoxide poisoning)

This product cannot eliminate carbon monoxide.

If the unit is placed within reach of a pet, be careful that the pet does not urinate on

the unit or chew on the power supply cord. (Fire, an electric shock, or injury may result)

 

„

Concerning the unit body

Do not obstruct the air inlets or air outlet with laundry, cloth, curtains, etc.

(Overheating or fire may result from poor circulation)

Do not climb, sit or lean on the unit.

 (Injury may result from falling or toppling)

 

„

When moving the unit

When picking up the unit to move it, handle the unit with caution.

 

Make sure to always hold the unit using the correct grips. Do not hold the unit using the grip on the deodorising filter

unit. (Injury may result from falling)

CJO001EU

Read First

01_EN_3P484757-1D.indd   4

10/1/2018   11:37:08 AM

Summary of Contents for MC40YPVM

























Reviews: