![background image](http://html1.mh-extra.com/html/daikin/lmsey1a09avm01/lmsey1a09avm01_installation-manual_3686960012.webp)
5 Installation
Installation manual
12
LMSEY1A09/13 + LMSEY2A19/25
Daikin LMS
4P728170-1 – 2023.03
1
Position the unit on a lifting table (a) and secure it with straps
(b). Be carefull not to dammage the drain pipe external
connection (d).
KG
b
c
d
e
f
a
g
a
Lifting table
b
Strap
c
Unit condenser
d
Drain pipe external connection
e
Unit evaporator
f
Drain pan assembly
g
Electric drain heater (inside the drain pan pipe)
2
Remove the 7 screws (h) and remove the drain pan assembly
(f).
f
h
h h h h
h
h
g
NOTICE
When the drain pan is removed, the electric drain heater
must be slid out of the drain pan pipe. The electric drain
heater must be pushed back into the drain pan pipe when
the drain pan is reinstalled.
In case of "wall mounting" method
In case of wall mounting method (see
11]), the optional insulation pad must be installed on the
unit. Refer to the installation instruction included in the insulation pad
option.
1
Install the insulation pad (a) at the back of the unit condenser
by sliding it in place.
2
Install the screws (d), the flat washers (b) and the spring
washers (c) through the holes on the back of the insulation pad
(a) and so in to the back panel of the unit condenser.
3
Tighten the screws (d) to the point that the spring washer (c) is
flattened.
b
a
c d
1
2
a
Insulation pad
b
Flat washer
c
Spring washer
d
Screw
4
Install the self-adhesive gasket (e) against the back panel (f) of
the unit condenser all around the insulation pad (a).
a
e
f
f
a
a
Insulation pad
e
Gasket
f
Back panel
5
The unit can now be positioned in front of the cold room wall for
installation.
KG
In case of "saddle mounting" method.
In case of saddle mounting method (see
11]), the unit can now be positioned in front of the cold room
wall for installation.
Summary of Contents for LMSEY1A09AVM01
Page 31: ......