0-UC 13-FEB 18-2
Page 14
4
UNIT LOCATION AND MOUNTING
4.1
Unit Location
Unit coolers must be located at places that provide good air circulation; otherwise the performances of the
unit cooler could be compromised. For best performance it is desirable to arrange the air discharge
blowing toward the door to minimize the entrance of warm moist air when door is open. Light fixtures,
shelving and product boxes must be located in a manner whereby they do not block the air intake and air
discharge from the unit cooler.
Side clearance should be reserved so that service work can be carried out.
IMPORTANT:
The coil face must be located a minimum of 0.6xH” from walls to assure unrestricted air intake.
4.2
Mounting
Daikin unit coolers come with mounting holes that can be fixed with the use of M8 or M10 bolts and nuts.
The unit must be installed in a level manner, to ensure water condensation can be properly drain out.
