Daikin KRCS01-8B, Installation Manual

Page: 5 / 10

English 3
f
a
b
c
d
e
a Fasten the terminals with care to
prevent the wires from touching each other
b Clamp (knot)
c Extension cable
d Sheathed part
e Sensor box
f Clamp hole
• Screw the sensor box securely to the wall surface with screws M4X16 (2
places). If the sensor box cannot be screwed to the wall surface, tear off the
released paper and mount it on the wall surface.
For embedded wiring
a
b
c
d
e
f
g
h
i
j
k
l
a Sensor box cover
b Mounting screw
c Sensor box
d Metal plate (for single unit
without hole), (fi eld supplied)
e Mounting frame which matches with
the switch box (fi eld supplied)
f Switch box (for single unit), (fi eld
supplied)
g Extension cable
h Through hole
i Sheathed part
j Clamp (knot)
k Sensor box
l Thermal insulation material
• Pass the extension cable through the switch box cable hole and carry out
the wiring.
• Pass the attached clamp through the clamp holes and tighten the
extension cable at the sheathed part as shown in the upper right fi gure.