9
Hazard information
The accessory is part of the building installation. The relevant
national standards and directives must be taken into consideration
during planning and set-up. The accessory has been designed
solely for operation on a 230 V/50 Hz AC supply. Only qualified
electricians (to VDE 0100) are permitted to carry out work on the
230 V mains. Applicable accident prevention regulations must be
complied with whilst such work is being carried out. To avoid electric
shocks from the accessory, please disconnect the mains voltage
(trip the miniature circuit-breaker). Noncompliance with the
installation instructions can cause fire or introduce other hazards.
When connecting to the terminals, take the permissible cables and
cable cross sections into account.
Take the technical data (in particular the maximum permissible
effective installed load of the accessory and the type of load to be
connected) into account before connecting a load! All load data
relates to ohmic loads. Do not exceed the capacity specified for the
accessory.
The accessory has not been designed to support safety
disconnection.
Exceeding the maximum capacity could lead to the destruction of
the accessory, fires or electric shocks.
Before the accessory is connected, remove the fuse from the fuse
box.
