13
Mounting
5
Mounting
You can flexibly mount the DHC Multi IO Box to a wall using the supplied
screws and plugs.
To mount the DHC Multi IO Box using screws, proceed as follows:
1.
Select a suitable mounting location close to your heating
system.
Make sure that no electricity or similar lines run in the wall at this
location!
2.
Use a pen to mark the positions of the four screw holes on
the wall
(see figure 2)
.
3.
Use an appropriate drill to make the 6 mm holes.
4.
Use the supplied screws and plugs to fix the DHC Multi IO
Box
(see figure 2)
.
