Operation
Adjusting Airflow Direction/CHILD LOCK operation
You can adjust the airflow direction to increase your comfort.
&
CAUTION
------------------
• Always use a remote controller to adjust the angles of the flaps. Moving the flaps forcibly by
hand may cause a malfunction.
• Be careful when adjusting the louvres. Inside the air outlet, a fan is rotating at a high speed.
Up and down airflow direction
■
To start auto swing
Press [<:�swiN�
• " (� " is displayed on the LCD.
• The flaps (horizontal blades) will begin to swing.
■
To set the flaps at desired position
• This function is effective while the flaps are in auto swing mode.
Press [<:�swiN� when the flaps reach the desired position.
• The flaps will stop moving.
• " (� " disappears from the LCD.
Right and left airflow direction
■
To adjust the louvres at desired position
Hold the knobs and move the louvres (vertical blades).
• When the unit is installed in the corner of a room, the
direction of the louvres should be facing away from
the wall.
If they face the wall, the wall will block off the
wind,causing the cooling efficiency to drop.
CHILD LOCK operation
Setting the CHILD LOCK disables all the buttons.
[]
Knobs
This function prevents children from operating the remote controller by mistake.
□
To set the CHILD LOCK :
• Press � and PowERc* together for about 5 seconds.
• "
-e
"
will be displayed on the remote LCD.
• If a button is pressed while CHILD LOCK is on,
"-e
"
blinks.
□
To CANCEL the CHILD LOCK
Press@§and
"
-e
"
Disappears from the LCD.
7