Daikin FXSQ-PAVE, Engineering Data

Page: 8 / 68

FXSQ-PAVE EDFMT391737
6
Model FXSQ80PAVE FXSQ100PAVE
Power supply 1 phase, 220-240/220 V, 50/60 Hz 1 phase, 220-240/220 V, 50/60 Hz

1

3 Cooling capacity
kcal/h 7,700 9,600
Btu/h 30,700 38,200
kW 9.0 11.2

2

3 Heating capacity
kcal/h 8,600 10,800
Btu/h 34,100 42,700
kW 10.0 12.5

7
Power input
Cooling
50 Hz kW 0.126 0.151
60 Hz kW 0.126 0.151
Heating
50 Hz kW 0.121 0.146
60 Hz kW 0.121 0.146
Casing / Colour Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 245×1,000×800 245×1,400×800
Fan
Model — —
Type Sirocco fan Sirocco fan
Motor output ×
Number of units
W 230×1 300×1
Airflow rate (H/M/L)
m³/min 23/19.5/16 32/27/22.5
l/s 383/325/267 533/450/375
cfm 812/688/565 1,130/953/794
External static
pressure
Pa Rated 50 (150-50

4) Rated 50 (150-50

4)
Drive Direct drive Direct drive
Temperature control
Microprocessor thermostat for
cooling and heating
Microprocessor thermostat for
cooling and heating
Air filter —

5 —

5
Piping
connections
Liquid pipes mm
φ 9.5 (Flare connection) φ 9.5 (Flare connection)
Gas pipes mm
φ
15.9 (Flare connection)
φ
15.9 (Flare connection)
Drain pipe mm
VP25
( External dia. 32 )
Internal dia. 25
VP25
( External dia. 32 )
Internal dia. 25
Mass kg 37 46

6 Sound pressure level (H/M/L) dB(A) 37.5/34/30 39/35/32
Sound power level (H) dB 65.5 67
Safety devices Fuse, Fan driver overload protector Fuse, Fan driver overload protector
Refrigerant control Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual, Installation manual, Drain
hose, Sealing material, Clamps, Washers,
Screws, Thermal insulation, Hose band, Air
discharge flange, Air suction flange
Operation manual, Installation manual, Drain
hose, Sealing material, Clamps, Washers,
Screws, Thermal insulation, Hose band, Air
discharge flange, Air suction flange
Drawing No.
Specification C: 3D105249A C: 3D105249A
Sound level C: 4D095809B C: 4D095810B
Notes:

1. Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Rated external static pressure / Equivalent piping
length: 7.5 m, level difference: 0 m.

2. Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Rated external static pressure / Equivalent piping length:
7.5 m, level difference: 0 m.

3. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.

4. External static pressure is changeable in 13 stages (20-40 class), 11 stages (50-125 class), 10 stages (140 class)
by remote controller.

5. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust
collection efficiency (gravity method) 50% or more.

6. Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual
operation, these values are normally somewhat higher as a result of ambient conditions.

7. Power input values are based on conditions of rated external static pressure.
8. Refer to
Electric Characteristics
for the power input when the airflow rate is maximum at maximum external
static pressure.
Conversion formulae
kcal/h=kW×860
Btu/h=kW×3412
cfm=m³/min×35.3
l/s=m³/min×1000/60