FWHSK
Humidity probe
FC66002768
Installation and operation manual
1
Installation and
operation manual
Humidity probe
FWHSK
Bound together the air temperature remote probe, the installation of the humidity remote probe
allow :
n
To display on the controller the envinment humidity
n
To select the Dehumidification function
PROBE CONNECTION ON CONTROLLER MY COMFORT
n
Connect the water SU sensor to the remote control using the supplied cable as acces
sory and, in case of prolongations, a shielded cable only.
n
The sensor cable (1.5 m) can be cut to measure if necessary. Never place it near
n
Open the controller after removing the screw of the cover.
n
Connect the probe to the connector and install it on the circuit board as indicated in the dia-
gram
n
Close the controlle
PROBE CONNECTION ON CONTROLLER EVO
n
Connect the probe to the connector and install it on the circuit board as indicated in the dia-
gram
WARNING :
To prevent disturbance and consequent malfunctions, make sure that the sensor cables are
NOT situated in proximity to power lines (230V).
In case of prolongations use shielded cable only.
Usable only if present the air temperature remote probe, they must be joined together.
Clip
