background image

39

Troubleshooting

 

Call the service shop immediately

 WARNING

 

When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker off.

• Continued operation in an abnormal condition may result in troubles, electric shocks or fire.
• Consult the service shop where you bought the air conditioner.

 

Do not attempt to repair or modify the air conditioner by yourself.

• Incorrect work may result in electric shocks or fire.
• Consult the service shop where you bought the air conditioner.

If one of the following symptoms takes place, call the service shop immediately.

• 

The power cord is abnormally hot or damaged.

• 

An abnormal sound is heard during operation.

• 

The safety breaker, a fuse, or the earth leakage breaker 

cuts off the operation frequently. 

• 

A switch or a button often fails to work properly.

• 

There is a burning smell.

• 

Water leaks from the indoor unit.

Turn the breaker off and call the service shop.

 

After a power failure

• The air conditioner automatically resumes operation in about 3 minutes. You should just wait for a while.

 

Lightning

• If lightning may strike the neighbouring area, stop operation and turn the breaker off for system protection.

 

Disposal requirements

Your product and the batteries supplied with the controller are marked with this symbol. This symbol means that 
electrical and electronic products and batteries shall not be mixed with unsorted household waste.
For batteries, a chemical symbol can be printed beneath the symbol. This chemical symbol means that the 
battery contains a heavy metal above a certain concentration. Possible chemical symbols are:

 

Pb: lead (>0.004%)

Do not try to dismantle the system yourself: the dismantling of the product, treatment of the refrigerant, of oil and of other parts 
must be done by a qualified installer in accordance with relevant local and national legislation.
Units and waste batteries must be treated at a specialized treatment facility for re-use, recycling and recovery.
By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health.
Please contact the installer or local authority for more information.

01_EN_3P320970-1A.indd   39

12/20/2012   11:22:44 AM

Summary of Contents for FTXS35K2V1B













































Reviews: