background image

English

22

ON TIMER Operation

 

To use ON TIMER operation

• Check that the clock is correct.

If not, set the clock to the present time. 

 Page 10

1. 

Press 

 .

•  “ 

 ” is displayed on the LCD.

•  “   ” blinks.

• 

“ 

 ” and day of the week disappear from the LCD.

2. 

Press 

 until the time setting reaches the 

point you like.

• Each pressing of either button increases or decreases the time setting by 10 minutes. 

Holding down either button changes the setting rapidly.

3. 

Press 

 again.

• 

“ 

 ” and setting time are displayed on the LCD.

• The TIMER lamp lights yellow. 

 Page 5

Display

 

To cancel ON TIMER operation

Press 

 .

• 

“ 

 ” and setting time disappear from the LCD.

• 

“ 

 ” and day of the week are displayed on the LCD.

• The TIMER lamp goes off.

 

To combine ON TIMER and OFF TIMER

• A sample setting for combining the 2 timers is shown below.

(Example)

Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00

Combined

NOTE

 

In the following cases, set the timer again.

•  After a breaker has turned off.
•  After a power failure.
•  After replacing batteries in the remote controller.

01_EN_3P320970-1A.indd   22

12/20/2012   11:22:21 AM

Summary of Contents for FTXS35K2V1B













































Reviews: