Si041140
Removal of Swing Motor / PCBs
Removal Procedure
15
4
Disconnect the
connector [S36] from
the INTELLIGENT EYE
sensor PCB.
5
Turn over the display
PCB ASSY, and
unfasten the 3 hooks to
remove the display
PCB.
6
Disconnect the
connector [S27] from
the display PCB.
7
The figure shows the
component parts of the
display PCB.
[S27]: for control PCB
Step
Procedure
Points
(R16676)
[S36]
(R16651)
Display PCB
(rear side)
(R14848)
[S27]
TIMER lamp
Signal receiver
Operation lamp
[ON/OFF] button