3
• Split Sky Air • Indoor Units
5
• Indoor Units • R-410A • FTXS-D3VMW_D2VMW
3
Dimensional drawing & centre of gravity
3 - 1 Dimensional drawing
FTXS-D
3D047234A
Gas pipe 9.5 CuT
(The length of pipe outside the
unit: about 390)
Left
Right
Blade angle
Wall hole for embedded piping
ø 65 hole
Standard locations of wall holes
Rear
Rear
The mark shows piping direction
Bottom
Frontpanel fixed screws (inside)
Signal transmitter
Flaps
Intelligent eye lamp
Signal receiver
Room temp. thermistor (inside)
Intelligent eye sensor
Timer lamp
Operation lamp
Indoor unit on/off switch
Wireless remote controller
(ARC433A50)
Right/left (manual)
Up/down (automatic)
Fan
Wall hole
ø 65 hole
Drain hose
(connecting part I.D. ø 14.0, O.D. ø 18.0)
(The hose length of outside the unit is
approx. 440)
Liquid pipe 6.4 CuT
(The length of pipe outside the
unit: about 340)
(space for
performance)
(s
p
ac
e f
o
r
per
for
m
an
ce)
(space for
performance)
Name plate
Terminal block with
earth terminal
Air flow (indoor)
including mounting
plate
Cooling, dry
Required space
Heating
50 min.
50 min.
30 m
in.
3D047237B
FTXS50D
unit (mm)
Left
Rear
Right
The mark (
Y
) shows piping direction
Signal receiver
Bottom
Flaps
Front panel fixed screws
(inside)
(Inside)
Timer lamp
Operation lamp
Signal transmitter
Infrared remote control
Up/down (automatic)
Blade angle
Right/left (manual)
Air flow (indoor)
(space for
maintenance)
(Including
mounting plate)
Name plate
Terminal block with
earth terminal
(space
for
performance)
(space for
maintenance)
Liquid pipe
J
6.4 CuT (the length of pipe outside
the unit: about 340)
Gas pipe 12.7Cut (The length of pipe
outside the unit: about 390)
Drain hose (connecting part I.D.
J
14.0, O.D.
J
18.0)
(The hose length on the outside of the
unit is approx. 440)
Wall hole for embedded piping
J
65 hole
Wall hole
J
65
hole
Standard locations of wall holes
Cooling, dry
Indoor unit ON/OFF switch
Fan
Intelligent eye lamp
Room temp. thermistor (Inside)
(ARC433A50)
Intelligent eye sensor
50 Min.
50 Min.
30
Min.
Required space
Heating
