18
What’s the HOME LEAVE operation?
Is there a set temperature and air
fl
ow rate which is most comfortable, a set temperature and air
fl
ow rate which you use the most?
HOME LEAVE operation is a function that allows you to record your favorite set temperature and air
fl
ow rate. You can start your
favorite operation mode simply by pressing the HOME LEAVE button on the remote controller. This function is convenient in the
following situations.
Useful in these cases
Use as an energy-saving mode.
1.
Set the temperature 3-5°F(2-3°C) higher (COOL) or lower (HEAT) than normal. Setting the fan speed to the lowest
setting allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
Every day before you leave the house...
•
When you go out, push the “HOME
LEAVE Operation” button, and the air
conditioner will adjust capacity to reach
the preset temperature for HOME LEAVE
Operation.
When you return, you will be welcomed
by a comfortably air conditioned room.
Push the “HOME LEAVE Operation”
button again, and the air conditioner will
adjust capacity to the set temperature for
normal operation.
Before bed...
•
Set the unit to HOME LEAVE Operation
before leaving the living room when
going to bed.
The unit will maintain the temperature in
the room at a comfortable level while you
sleep.
When you enter the living room in the
morning, the temperature will be just right.
Disengaging HOME LEAVE Operation
will return the temperature to that set for
normal operation. Even the coldest
winters will pose no problem!
Use as a favorite mode.
2.
Once you record the temperature and air
fl
ow rate settings you most often use, you can retrieve them by pressing HOME
LEAVE button. You do not have to go through troublesome remote controller operations.
NOTE
Once the temperature and air
fl
ow rate for HOME LEAVE operation are set, those settings will be used whenever HOME LEAVE operation is used in
•
the future. To change these settings, please refer to the “Before using HOME LEAVE operation” section above.
HOME LEAVE operation is only available in COOL and HEAT mode. It cannot be used in AUTO, DRY, and FAN mode.
•
HOME LEAVE operation runs in accordance with the previous operation mode (COOL or HEAT) before using HOME LEAVE operation.
•
HOME LEAVE operation and POWERFUL operation cannot be used at the same time.Last button that was pressed has priority.
•
The operation mode cannot be changed while HOME LEAVE operation is being used.
•
When operation is shut off during HOME LEAVE operation, using the remote controller or the indoor unit ON/OFF switch, “
•
” will remain on the
remote controller display.
01_EN_3P232717-1C.indd 18
01_EN_3P232717-1C.indd 18
12/22/2008 2:51:36 PM
12/22/2008 2:51:36 PM
