12
Adjusting the Air
fl
ow Direction
You can adjust the air
fl
ow direction to increase your comfort.
Adjusting the upper and lower air
fl
ow direction
To adjust the
fl
aps (horizontal blades)
Press
1.
.
“
•
” is displayed on the LCD and the
fl
aps will begin to swing.
When the
fl
aps have reached the desired position,
2.
press
once more.
The
fl
aps will stop moving.
•
“
•
” disappears from the LCD.
Adjusting the right and left air
fl
ow direction
To adjust the louvers (vertical blades)
Hold the knob and move the louvers.
•
(You will
fi
nd a knob on the left-side and the right-side blades.)
NOTE
Notes on
fl
aps and louvers angles
When “
•
SWING button
” is selected, the
fl
aps swinging range depends on the operation mode.
(See the
fi
gure.)
Three-Dimensional (3-D) Air
fl
ow
Using three-dimensional air
fl
ow circulates cold air, which tends to collected at the bottom of the
•
room, and hot air, which tends to collect near the ceiling, throughout the room, preventing areas
of cold and hot developing.
ATTENTION
Always use a remote controller to adjust the angles of the
fl
aps and louvers. If you attempt to
•
move it forcibly with hand when it is swinging, the mechanism may be broken.
Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is
•
rotating at a high speed.
When stop operation
Upper limit in COOL
Lower limit in COOL
0°
25°
5°
30°
When stop operation
Upper limit in HEAT
Lower limit in HEAT
COOL AND DRY MODE
HEAT AND FAN MODE
01_EN_3P232717-1C.indd 12
01_EN_3P232717-1C.indd 12
12/22/2008 2:51:33 PM
12/22/2008 2:51:33 PM
