Si04-756
Removal of Swing Motors
Removal Procedure
35
11.Removal of Swing Motors
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the swing motors
for horizontal blades.
Preparation
Remove the electrical box
according to "Removal of
Electrical Box".
1
Cut the clamp.
2
Release the lead wire
for the swing motors
from the 3 hooks.
3
Remove the 2 screws
and remove the swing
motor for the lower
blade (small).
Caution
When reassembling, do not
confuse the installing order
of the 2 motors and the
colors of the connectors.
If you set the connectors or
motors opposite, the
horizontal blades do not
move smoothly or the noise
may be heard.
(1) Set the motor for the upper
blade first.
(connector: green)
(2) Then, set the motor for the
lower blade.
(connector: red)
4
Remove the screw and
remove the swing
motor for the upper
blade (large).
2. Remove the swing motor
for vertical blades.
1
Remove the screw of
the drain hose.
2
Remove the 2 screws
of the swing motor
assembly.
(R13969)
Hook
(R13970)
For upper blade
For lower blade
(R5733)
(R13971)
Swing motor assembly