Daikin FTXN25MV1B, Technical Manual

Page: 13 / 50

9
Application Information
Installation Diagram
Wall Mounted
Indoor Unit
Outdoor Unit
50mm or more from walls
(on both sides)
Front panel
30mm or more from ceiling
M4 x 12L
Air filter
Air-Purifying Filter with
bacteriostatic virustatic function (2)
Air filter
Air-Purifying Filter with
bacteriostatic virustatic
function
Filter frame
Tab
250mm from wall
Service lid
Opening service lid
Service lid is opening/closing
type.
Opening method
1) Remove the service lid
screws.
2) Pull out the service lid
diagonally down in
the direction of the arrow.
1) Pull down.
Caulk pipe
hole gap
with putty.
Cut thermal insulation
pipe to an appropriate
length and wrap it with
tape, making sure that no
gap is left in the insulation
pipe's cut line.
Wrap the insulation pipe with
the finishing tape from bottom
to top.
• Before installing the unit, ensure that the power supply matches the power requirement of the air conditioner.
Installation of Indoor Unit
Service Space
Install the indoor unit at a location with the following requirements
• Location is suitable for wiring, piping and drainage.
• No obstruction of air
fl ow into and out of unit where cooler air can be evenly distributed.
• Ensure that air discharge is not short circuited with air intake.
• Ensure that wall is suf
fi ciently strong, rigid, fl at, perpendicular and vibration free.
• Where air fi lter cassette can be slided in or out easily.
• Where there is no danger of fl ammable gases.
• Where there is no direct sunlight on unit.
min. 50
min. 30
(Space for
maintenance)
min. 50
(Space for
maintenance)
(Space for performance)
Air flow
(Indoor)
Required space