4 Operation
Operation manual
6
FTXM20~71N2V1B
Daikin room air conditioner
3P485919-8K – 2018.09
2
To use fixed position, press
when the louvers reach the
desired position.
Result:
disappears from the LCD. The louvers will stop
moving.
INFORMATION
When the unit is installed in a corner of a room, the
direction of the louvers should be facing away from the
wall. Efficiency will drop if a wall blocks the air.
4.4.3
To use 3-D airflow direction
1
Press
and
.
Result:
and
appear on the LCD. The flaps (horizontal
blades) and louvers (vertical blades) will begin to swing.
2
To use fixed position, press
and
when the flaps
and louvers reach the desired position.
Result:
and
disappear from the LCD. The flaps and
the louvers will stop moving.
4.5
Comfort airflow and Intelligent eye
operation
You can use Comfort and Intelligent eye operation separately, or
combine them.
4.5.1
Comfort airflow operation
This operation can be used in
heating
or
cooling
operation mode. It
will provide a comfortable wind that will NOT come in direct contact
with people. The system automatically sets the fixed airflow position
upward in Cooling and downward in Heating operation mode.
Cooling operation mode
Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used
at the same time. The last selected function takes priority.
If the vertical automatic swing is selected, Comfort airflow
operation will be cancelled.
4.5.2
Intelligent eye operation
The system detects movement in the room and automatically adjusts
the airflow direction and temperature in order to avoid direct contact
with people. If no movement is detected for 20 minutes, the system
switches to energy saving operation:
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so
may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye
sensor.
INFORMATION
Powerful or Night set operation CANNOT be used at the
same time with Intelligent eye operation. The last selected
function takes priority.
▪
Detection sensitivity.
Changes according to location, the number
of persons in the room, temperature range, etc.
▪
Detection mistakes.
The sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
4.5.3
To start/stop Comfort and Intelligent eye
operation
1
Press
one or more times.
Result:
The setting will change as follows:
Display
Operation
Comfort airflow
Intelligent eye
+
Comfort airflow and Intelligent eye
—
Both deactivated
Note:
If there are people close to the front of the indoor unit or there
are too many people, use both operations at the same time.
2
To stop operation, press
until both symbols disappear
from the LCD.
4.6
Powerful operation
This operation quickly maximizes the cooling/heating effect in any
operation mode. You can get the maximum capacity.
INFORMATION
Powerful operation CANNOT be used together with Econo,
Comfort airflow, Intelligent eye and Outdoor unit quiet
operation. The last selected function takes priority.
Powerful operation will NOT increase the capacity of the
unit if it already operates at maximum capacity.
4.6.1
To start/stop Powerful operation
1
Press
to start.
Result:
is displayed on the LCD. Powerful operation runs
for 20 minutes; after that, operation returns to the previously set
mode.
2
Press
to stop.
Result:
disappears from the LCD.
Note:
Powerful operation can be set only when the unit is running. If
you press
, operation will be cancelled;
disappears from the
LCD.
4.7
Econo and Outdoor unit quiet
operation
4.7.1
Econo operation
This is a function which enables efficient operation by limiting the
maximum power consumption value. This function is useful for cases
in which attention should be paid to ensure a circuit breaker will not
trip when the product runs alongside other appliances.
