Front Panel / Air Filters
Si042153E
2
Removal Procedure
1. Front Panel / Air Filters
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1. Appearance
1
Appearance and name
of parts.
A beep and blinking of the
operation lamp are indication
of received signal from the
remote controller.
Pressing
ON/OFF
switch for
5 seconds or longer can start
forced cooling operation.
2. Remove the front panel.
1
Open the front panel
until it stops.
2
Slide each rotary shaft
outward and pull up to
remove.
When reassembling the front
panel, fit the right and left
rotary shafts one by one into
the grooves and fully push
them in position.
(R26137)
Signal
receiver
ON/OFF switch/
OPERATION lamp
INTELLIGENT EYE sensor
Wireless LAN
connection
adapter lamp
INTELLIGENT
EYE lamp
CLEAN lamp
TIMER lamp
(R26138)
Front panel
Left
Rotary shaft
(R26139)
Right
Rotary shaft
(R26140)
