Vertical Swing Motor
Si042153E
20
Removal Procedure
2
3
Detach the snap band.
Remove the 2 screws,
and then remove the
gear case.
4
5
Turn the gear case,
unfasten the 3 hooks
and open the gear
cover.
Remove the gear and
gear rack.
6
7
8
Unfasten the hook and
open the motor cover.
Remove the screw, and
then, the swing motor
for vertical blade.
Disconnect the
connector.
3. Remove the vertical blade
ASSY.
It is necessary to unfasten all
hooks in order to remove the
center shaft.
The number of vertical blade
ASSY and hooks on the
blade varies depending on
the models.
1
Unfasten the hooks,
and then remove the
center shaft.
Step
Procedure
Points
Snap band
Gear case
(R26115)
Gear cover
Hook
Gear
Hook
Gear rack
(R26116)
Swing motor for
vertical blade
Motor cover
Hook
(R26117)
Center shaft
Hook
Hook
(R26113)
