Si042153E
Drain Pan
Removal Procedure
17
6. Drain Pan
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
2
Remove the screw.
Slide the electrical box
cover forward to
unfasten the hook, and
then remove it.
Screw size: M4 × 12 (with
washer)
The drain pan can be
removed without removing
the electrical box.
When reassembling, make
sure that the hook is
securely fastened.
3
4
Disconnect the
connector [S400].
Release the harnesses
from the 5 hooks and
the notch.
[S400]: swing motors
5
6
Unfasten the hook and
open the signal receiver
unit to the lower right
until it clicks.
Remove the drain hose
fixing screw, and then
detach the drain hose.
Place a plastic sheet around
the drain pan to prevent
wetting the floor with
remaining drain.
Hook
Electrical box cover
(R26153)
[S400]
Hook
Notch
Hook
Hook
(R26173)
Hook
Drain hose
Signal receiver
unit
(R26174)
