background image

System

Error code

Description

Normal
Refrigerant shortage
Overvoltage detection
Signal transmission error (between indoor and 
outdoor unit)
Indoor/outdoor unit combination fault

Indoor unit

Error code

Description

Indoor unit PCB abnormality

Freeze-up protection or high-pressure control

Fan motor (DC motor) abnormality
Streamer unit error
Indoor heat exchanger thermistor abnormality
Opening or closing front panel error
Room temperature thermistor abnormality
Humidity sensor error

Outdoor unit

Error code

Description

4-way valve abnormality
Outdoor unit PCB abnormality
Overload activation (compressor overload)
Compressor lock
DC fan lock
Input power overcurrent
Discharge pipe temperature control
High-pressure control (in cooling mode)
Compressor system sensor abnormality
Position sensor abnormality
DC voltage / current sensor abnormality
Outdoor temperature thermistor abnormality
Discharge pipe thermistor abnormality
Outdoor heat exchanger thermistor abnormality
Electrical parts heat error

Radiation fin temperature rise

Inverter instantaneous overcurrent (DC)

Radiation fin thermistor abnormality

Compressor internal temperature error

7-3 

Troubleshooting for wireless connection adapter

The following table provides a brief description of how to deal 

with some problems. If none of the following solutions fix the 

problem, go to http://www.daikinthai.com/dmobile/index.html/ 
for more information and FAQ.

Problem

Measure

Connection to the WLAN adapter 
is not possible (none of the LEDs 
are blinking).

• 

Try operating the unit with the 
remote controller.

• 

Check if the power is on.

• 

Turn the unit off and back on 
again.

The WLAN adapter is NOT 
visible on the unit overview 
screen (Home screen) after 

configuration of the WLAN 

adapter (WPS option).

• 

Make sure the wireless LAN 
adapter is close enough to 
the communication device.

• 

Check if communication 

is OK. See “To confirm the 

wireless adapter connection 

status” on page 14.

• 

Make sure that the smart 
device is connected to the 
same wireless network as the 
WLAN adapter.

• 

Try resetting to the factory 
default and repeat the setting. 

See “To reset the connection 
setting to the factory default” 

on page 15.

The WLAN adapter is NOT 
visible in the available Wi-Fi 
networks list on the smart device
(Access point option).

• 

Try switching between access 
point and WPS setting to 
change the wireless channel.
The wireless channel MUST be 
between 1~13.

• 

Check if communication is OK. 

See “To confirm the wireless 
adapter connection status” on 

page 14.

• 

Try to resetting to the factory 
default and repeat the setting.

See “To reset the connection 
setting to the factory default” on 

page 15.

8.  Disposal

 NOTICE

Do NOT try to dismantle the system yourself: dismantling of the 
system, treatment of the refrigerant, oil and other parts MUST 
comply with applicable legislation. 
Units MUST be treated at a specialised treatment facility for 
reuse, recycling and recovery.

 22

01_EN_3P705032-1.indd   22

30/08/2022   10:20:17 am

Summary of Contents for FTXJ25T2VMAW

























Reviews: