background image

17

COMFORT AIRFLOW / 

INTELLIGENT EYE Operation

NOTE

Notes on COMFORT AIRFLOW operation

 

„

The position of the 

fl

 aps will change, preventing air from blowing directly on the occupants of the room.

• 

POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.

• 

Priority is given to the function of whichever button is pressed last.
The air

fl

 ow rate will be set to AUTO. If the up and down air

fl

 ow direction is selected, COMFORT AIRFLOW operation will be cancelled.

• 

Notes on INTELLIGENT EYE operation

 

„

Application range is as follows.

• 

90°

55°

7m

55°

Vertical angle 90°
(Side view)

Horizontal angle 110°
(Top view)

7m

While the air conditioner is in INTELLIGENT EYE operation, the louvres adjust the air

fl

 ow direction if there are people in the sensing areas 

• 

of the INTELLIGENT EYE so that the leftward or rightward air

fl

 ow will not be directed to the people. 

If no people are detected in either area 1 or 2 for 20 minutes, the air conditioner switches to the energy-saving mode with the set 
temperature shifted by 2°C. 
The air conditioner may switch to the energy-saving operation even if there are people in the areas. 
This may occur depending on the clothes the people are wearing, if there is no movement of the people in the areas.
The air

fl

 ow direction from the louvres will be leftward if there are people in both areas 1 and 2. The air will also 

fl

 ow left if there is a person 

• 

right in front of the sensor as the sensor judges that there are people in both areas.
Due to the position of the sensor, people might be exposed to the air

fl

 ow of the indoor unit if they are close to the front side of the indoor unit.

• 

 

If there are people close to the front side of the indoor unit or in both areas, it is recommended to use the COMFORT AIRFLOW and 
INTELLIGENT EYE operations simultaneously. Using both modes together, the air conditioner will not direct the air

fl

 ow towards the people.

The sensor may not detect moving objects further than 7m away. (Please see the application range.)

• 

Sensor detection sensitivity changes according to the indoor unit location, the speed of passers-by, temperature range, etc.

• 

The sensor could also mistakenly detect pets, sunlight, 

fl

 uttering curtains and light re

fl

 ected off of mirrors as passers-by.

• 

INTELLIGENT EYE operation will not switch on during POWERFUL operation.

• 

NIGHT SET mode 

• 

 Page  21

 will not switch on during use of INTELLIGENT EYE operation.

Notes on combining COMFORT AIRFLOW operation and INTELLIGENT EYE operation

 

„

The air

fl

 ow rate will be set to AUTO. If the up and down air

fl

 ow direction is selected, COMFORT AIRFLOW operation will be canceled.

• 

 

Priority is given to the function of whichever button is pressed last.
When the INTELLIGENT EYE sensor detects the movement of people, it adjusts the air

fl

 ow direction upward (while in COOL operation) and 

• 

downward (while in HEAT operation), by adjusting the 

fl

 aps. When the sensor detects people, the louvres will direct the air

fl

 ow in such a way 

that it will not be blown directly on them. If there are no people, the air conditioner will switch to energy-saving operation after 20 minutes.

 CAUTION

Do not place large objects near the INTELLIGENT EYE sensor.

• 

Also keep heating units and humidi

fi

 ers outside the sensor’s detection area. This sensor can detect undesirable objects.

Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.

• 

01_EN_3P369488-1.indd   17

01_EN_3P369488-1.indd   17

6/11/2014   10:59:03 AM

6/11/2014   10:59:03 AM

Summary of Contents for FTXJ25PVMAW









































Reviews: