8 Troubleshooting
Operation manual
10
FTXF50~7 FTXF50~71A2V1B
Daikin room air conditioner
3P511999-6J – 2021.07
2
1
3
Wash the air filters with water or clean them with a vacuum
cleaner.
4
Soak in lukewarm water for about 10 to 15 minutes.
5
Install all filters back in their original positions.
INFORMATION
▪ If the dust does NOT come off easily, wash them with a
neutral detergent diluted in lukewarm water. Dry the air
filters in the shade.
▪ It is recommended to clean the air filters every 2
weeks.
7.6
To close the front panel
1
Set the filters as they were.
2
Gently press the front panel at both sides and at the center until
it clicks.
7.7
To take following items into
account before a long idle period
Operate the unit in
fan only
mode for several hours to dry the inside
of the unit.
1
Press
and select fan only operation.
2
Press
to start operation.
3
After operation stops, turn the breaker off.
4
Clean the air filters and replace them in their original position.
5
Remove the batteries from the user interface.
INFORMATION
It is recommended to have periodical maintenance
performed by a specialist. For specialist maintenance,
contact your dealer. Maintenance costs shall be borne by
the customer.
In certain operating conditions the inside of the unit may
get dirty after several seasons of use. This results in poor
performance.
8
Troubleshooting
If one of the following malfunctions occur, take the measures shown
below and contact your dealer.
WARNING
Stop operation and shut OFF the power if anything
unusual occurs (burning smells etc.).
Leaving the unit running under such circumstances may
cause breakage, electrical shock or fire. Contact your
dealer.
The system MUST be repaired by a qualified service person.
Malfunction
Measure
If a safety device such as a fuse, a
breaker or an earth leakage breaker
frequently actuates or the ON/OFF
switch does NOT properly work.
Turn OFF the main power
switch.
If water leaks from the unit.
Stop the operation.
The operation switch does NOT work
well.
Turn OFF the power
supply.
The operation lamp flashes and you can
check the error code by the user
interface. To display the error code see
the user reference guide.
Notify your installer and
report the error code.
If the system does NOT operate properly except for the above
mentioned cases and none of the above mentioned malfunctions is
evident, investigate the system in accordance with the following
procedures.
INFORMATION
Refer to the reference guide located on
www.daikineurope.com/support-and-manuals/product-
information/
for more troubleshooting tips.
If after checking all above items, it is impossible to fix the problem
yourself, contact your installer and state the symptoms, the complete
model name of the unit (with manufacturing number if possible) and
the installation date (possibly listed on the warranty card).
9
Disposal
NOTICE
Do NOT try to dismantle the system yourself: dismantling
of the system, treatment of the refrigerant, oil and other
parts MUST comply with applicable legislation. Units
MUST be treated at a specialised treatment facility for
reuse, recycling and recovery.
