26
English
Cleaning and Maintenance
Clean filter
Open panel
Pull out the panel to a certain
angle as shown in the fig.
1
Clean filter
●
Use dust catcher or water to clean
the filter
●
When the filter is very dirty, use
the water (below 45°C) to clean it,
and then put it in a shady and cool
place to dry.
3
Remove filter
Remove the filter as indicated
in the fig.
2
Install filter
Install the filter and then close the
panel cover tightly.
4
■
The filter should be cleaned every three months. If there is much dust in the
operation environment, cleaning frequency can be increased.
■
After removing the filter, do not touch fins to avoid injury.
■
Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
Note:
