![background image](http://html1.mh-extra.com/html/daikin/ftkz50uv16u4/ftkz50uv16u4_operation-manual_4703593006.webp)
Operation
COOL · DRY · FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
■
To start operation
■
To stop operation
1. Press
@
• "mD" is displayed on the LCD.
• The OPERATION lamp lights green.
]I�/
Display
2. Press
8
and select an
operation mode.
• Each pressing of the button
changes the mode setting in
sequence.
(
$
---+
�
---+
*
""'\
Cool
Dry
Fan
✓
Press
again.
• "[;lD" disappears from the LCD.
• Then OPERATION lamp goes off.
■
To change the temperature
setting
• Press + to raise the temperature
and press - to lower the
temperature.
COOUDRY
FAN
operation
operation
The temperature
16-31 °C
setting cannot be
changed.
+
Default Set Temperature Setting
: As per BEE regulation, whenever Air Conditioner will be switched
ON from the remote, the default set temperature will be set as mentioned in below table:
5
Mode
Set temperature before remote switched OFF
Set temperature after remote switched ON
Cool&
If set temperature < 24 'C
Default set temperature will be 24'C.
Dry
If set temperature >= 24 'C
Default set temperature will remain same
as set prior to remote switched OFF.
NOTE
■
Note on COOL operation
• This air conditioner cools the room by releasing heat in the room outdoors.
• Therefore, cooling performance may fall in higher outdoor temperatures.
■
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible.
■
Note on FAN operation
• This mode is valid for fan only.
■
Recommended temperature setting
• For cooling: 26-28
°
C