background image

WHEN THE NEED ARISES

WHEN THE NEED ARISES

Check again.

Please check again before calling a repair person�

Case

What to check

The air conditioner does not operate.
OPERATION lamp is off.

• 

Hasn’t a breaker turned OFF or a fuse blown?

• 

Isn’t it a power failure?

• 

Are batteries set in the remote controller?

• 

Is the timer setting correct?

OPERATION lamp blinks.

• 

Turn off the power with the circuit breaker and restart 

operation with the remote controller. If the OPERATION lamp 

is still blinking, check the error code and consult your dealer�

Cooling effect is poor.

• 

Are the air filters clean?

• Is there anything blocking the air inlet or air outlet of the 

indoor unit or outdoor unit?

• 

Is the temperature setting appropriate?

• 

Are the windows and doors closed?

• 

Are the airflow rate and the air direction set appropriately?

• 

Are outdoor ambient temperature not in operation range?

• Is the unit set to the ECONO/MOLD PROOF/OUTDOOR 

UNIT QUIET mode? 

Page 15-18

Operation stops suddenly.

(OPERATION lamp blinks.)

• 

Are the air filters clean?

• Is there anything blocking the air inlet or air outlet of the 

indoor unit or outdoor unit?

• 

Clean the air filters or take all obstacles away and turn the 

breaker OFF� Then turn it ON again and try operating the air 

conditioner with the remote controller. If the lamp still blinks, 

call the service shop where you bought the air conditioner.

An abnormal functioning 

happens during operation.

• 

The air conditioner may malfunction with lightning or radio 

waves. Turn the breaker OFF, turn it ON again and try 

operating the air conditioner with the remote controller.

 

„

Notes on the operating conditions

• 

The air conditioner always consumes a small amount of electricity even while it is not operating.

• If you are not going to use the air conditioner for a long period, for example in spring or autumn, 

turn the breaker off�

• 

Use the air conditioner in the following conditions.

MODE

Operating conditions

If operation is continued out of this range

COOL / DRY

Outdoor temperature : 19�4-46°C
Indoor temperature : 16-32°C
Indoor humidity : 80% max�

• 

A safety device may work to stop the operation.

•  Condensation may occur on the indoor unit and drip�

• Operation outside this humidity or temperature range may cause a safety device to disable the 

system�

27

01_EN_3P658678-13V_WEB.indd   27

14-Mar-23   12:02:28 PM

Summary of Contents for FTKQ09XV2S





































Reviews: