36
Care
When the Need Arises
FAQ
Indoor unit
Wireless LAN connecting adapter
Outdoor unit
Operation does not start soon.
When the unit is turned on again soon after
being turned off.
When the mode was reselected.
•
This is to protect the air conditioner.
You should wait for about 3 minutes.
The flap does not start swinging
immediately.
•
The air conditioner is adjusting the position of the flap.
The flap will start moving soon.
Different sounds are heard.
A sound like flowing water
•
This sound is generated because the refrigerant in
the air conditioner is flowing.
•
This is a pumping sound of the water in the air conditioner
and can be heard when the water is pumped out from the
air conditioner during COOL or DRY operation.
Ticking sound
•
This sound is generated when the cabinet and
frame of the air conditioner slightly expand or shrink
as a result of temperature changes.
Clicking sound during operation or idle time
•
This sound is generated when the refrigerant control
valves or the electrical parts operate.
Clopping sound
•
This sound is heard from the inside of the air
conditioner when the exhaust fan is activated while
the room doors are closed. Open the window or turn
off the exhaust fan.
Rotating machinery causes sound
•
Sound is heard when the vertical swing flap and
the horizontal swing flap move.
•
When the air conditioner is operating in a quiet
environment and the airflow rate of the indoor unit is
set to Quiet Mode or Low Mode, the motion of the
swing flap may cause sound.
The outdoor unit emits water.
In COOL or DRY operation
•
Moisture in the air condenses into water on the cool surface of the outdoor
unit piping and drips.
* The appearance of the outdoor unit
may differ between different models.
The LEDs blink through the front panel.
•
The lamp can be disabled via the mobile application.
Page 9
Indoor unit
Lights through
Inside
01_EN_3P620957-16R.indd 36
01_EN_3P620957-16R.indd 36
06/12/2022 14:04:36
06/12/2022 14:04:36