background image

37

When the Need Arises

When the Need Arises

Not a problem

This case is not a problem.

Check

Please check again before requesting 
repairs.

The air conditioner does not operate

Case

Description / what to check

OPERATION lamp is off.

• 

Has the circuit breaker been tripped or the fuse blown?

• 

Is there a power failure?

• 

Are batteries set in the remote controller?

OPERATION lamp is blinking.

• 

Turn off the power with the circuit breaker and restart operation with the remote controller.

 

If the OPERATION lamp is still blinking, check the error code and consult your dealer. 

 

 

 Page  40

The air conditioner suddenly stops operating

Case

Description / what to check

OPERATION lamp is on.

• 

To protect the system, the air conditioner may stop operating after sudden large voltage 
fluctuations. It automatically resumes operation in about 3 minutes.

OPERATION lamp is blinking.

• 

Is there anything blocking the air inlet or air outlet of the indoor unit or outdoor unit?

 

Stop operation and after turning off the circuit breaker, remove the obstruction. Then restart 
operation with the remote controller. If the OPERATION lamp is still blinking, check the error 
code and consult your dealer. 

 Page  40

The air conditioner does not stop operating

Case

Description / what to check

The air conditioner continues 

operating even after operation is 

stopped.

 

„

Immediately after the air conditioner is stopped

• 

The outdoor unit fan continues rotating for about another 1 minute to protect the system.

 

„

While the air conditioner is not in operation

• 

When the outdoor temperature is high, the outdoor unit fan may start rotating to protect 
the system. 

The room does not cool down

Case

Description / what to check

Air does not come out.

 

„

In COOL or DRY operation

• 

If COOL/DRY operation is started with airflow settings on “AUTO”, the indoor unit will 
initially deodorise, which functions to suppress any internal odours. As a result, the indoor 
unit will not emit air immediately. (Wait for about 1 minute.)

 

„

When the air conditioner operates immediately after the circuit breaker is turned on

• 

The air conditioner is preparing to operate. Wait for about 3 to 20 minutes.

Air does not come out /  

Air comes out.

 

„

Is the airflow rate setting appropriate?

• 

Is the airflow rate setting low, such as “Indoor unit quiet” or “Airflow rate 1”? Increase the 
airflow rate setting.

 

„

Is the set temperature appropriate?

 

„

Is the adjustment of the airflow direction appropriate?

Air comes out.

• 

Is there any furniture directly under or beside the indoor unit?

• 

Is the air conditioner in ECONO operation or OUTDOOR UNIT QUIET operation? 

 Page  21

• 

Are the air filters dirty?

• 

Is there anything blocking the air inlet or air outlet of the indoor unit or outdoor unit?

• 

Is a window or door open?

• 

Is an exhaust fan turning?

Troubleshooting

Air conditioner

Before making an inquiry or a request for repair, please check the following.

 

If the problem persists, consult your dealer.

01_EN_3P620957-16R.indd   37

01_EN_3P620957-16R.indd   37

06/12/2022   14:04:36

06/12/2022   14:04:36

Summary of Contents for FTKM25XVMG













































Reviews: