background image

2

READ BEFORE OPERATION

Safety precautions

Keep this manual where the operator can easily find them.

Read this manual attentively before starting up the unit.

For safety reason the operator must read the following cautions carefully.

This manual classifies precautions into WARNING and CAUTION. Be sure to follow all precautions below: they are all 
important for ensuring safety.

WARNING

In order to avoid fire, explosion or injury, do not operate the unit when harmful, among which flammable or 
corrosive gases, are detected near the unit.

It is not good for health to expose your body to the air flow for a long time.

Do not put a finger, a rod or other objects into the air outlet or inlet. As the fan is rotating at a high speed, it will 
cause injury.

Do not attempt to repair, relocate, modify or reinstall the air conditioner by yourself. Incorrect work will cause electric 
shocks, fire etc. 
For repairs and reinstallation, consult your Daikin dealer for advice and information.

The refrigerant used in the air conditioner is safe. Although leaks should not occur, if for 
some reason any refrigerant happens to leak into the room, make sure it does not come in 
contact with any flame as of gas heaters, kerosene heaters or gas range.

If the air conditioner is not cooling properly, the refrigerant may be leaking, so call your dealer.
When carrying out repairs accompanying adding refrigerant, check the content of the repairs with our service staff.

Do not attempt to install the air conditioner by your self. Incorrect work will result in water leakage, electric shocks or 
fire. For installation, consult the dealer or a qualified technician.

In order to avoid electric shock, fire or injury, if you detect any abnormally such as smell of fire, stop the operation and 
turn off the breaker. And call your dealer for instructions.

CAUTION

The air conditioner must be earthed. Incomplete earthing may result in electric shocks. Do not connect the 
earth line to a gas pipe, water pipe, lightning rod, or a telephone earth line.

In order to avoid any quality deterioration, do not use the unit for cooling precision instruments, food, plants, 
animals or works of art.

Never expose little children, plants or animals directly to the air flow.

Do not place appliances which produce open fire in places exposed to the air flow from the unit or under the 
indoor unit. It may cause incomplete combustion or deformation of the unit due to the heat.

Do not block air inlets nor outlets. Impaired air flow may result in insufficient performance or trouble.

WARNING

If you do not follow these instructions exactly, the unit may 
cause property damage, personal injury or loss of life.

CAUTION

If you do not follow these instructions exactly, the unit may 
cause minor or moderate property damage or personal injury.

Never do.

Be sure to follow the instructions.

Be sure to earth the air conditioner.

Never cause the air conditioner (including the remote 

controller) to get wet.

Never touch the air conditioner (including the remote 

controller) with a wet hand.

01_EN_3P192025-3.fm  Page 2  Tuesday, October 10, 2006  4:58 PM

Summary of Contents for FT50FVM

























Reviews: