background image

13

POWERFUL Operation

POWERFUL operation quickly maximizes the cooling 
effect in any operation mode. You can get the maximum 
capacity.

To start POWERFUL 
operation

1. Press “POWERFUL button”.

POWERFUL operation ends in 20 minutes.  
Then the system automatically operates 
again with the settings which were used 
before POWERFUL operation.

When using Powerful operation, there 
are some functions which are not avail-
able.

” is displayed on the LCD.

To cancel POWERFUL 
operation

2. Press “POWERFUL button” 

again.

” disappears from the LCD.

NOTE

Notes on POWERFUL operation

POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button 
causes the settings to be canceled, and the “

” disappears from the LCD.

• In COOL mode

The air flow rate is fixed to the maximum setting.
The temperature and air flow settings are not variable.

• In DRY mode

The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.

• In FAN mode

The air flow rate is fixed to the maximum setting.

1, 2

01_EN_3P192025-3.fm  Page 13  Tuesday, October 10, 2006  4:58 PM

Summary of Contents for FT50FVM

























Reviews: