manualshive.com logo in svg

Daikin FHA100AVEB8, User Reference Manual

Share
Download
Daikin FHA100AVEB8 User Reference Manual Download Page 5

1

 | 

About the documentation

Installer and user reference guide

5

FHA-A(9)
Split system air conditioner
4P708119-1 – 2022.11

1.2 Meaning of warnings and symbols

DANGER

Indicates a situation that results in death or serious injury.

DANGER: RISK OF ELECTROCUTION

Indicates a situation that could result in electrocution.

DANGER: RISK OF BURNING/SCALDING

Indicates a situation that could result in burning/scalding because of extreme hot or
cold temperatures.

DANGER: RISK OF EXPLOSION

Indicates a situation that could result in explosion.

WARNING

Indicates a situation that could result in death or serious injury.

WARNING: FLAMMABLE MATERIAL

CAUTION

Indicates a situation that could result in minor or moderate injury.

NOTICE

Indicates a situation that could result in equipment or property damage.

INFORMATION

Indicates useful tips or additional information.

Symbols used on the unit:

Symbol

Explanation

Before installation, read the installation and operation
manual, and the wiring instruction sheet.

Before performing maintenance and service tasks, read the
service manual.

For more information, see the installer and user reference
guide.

The unit contains rotating parts. Be careful when servicing or
inspecting the unit.

Symbols used in the documentation:

Symbol

Explanation

Indicates a figure title or a reference to it.

Example: 

"  1–3 Figure title" means "Figure 3 in chapter 1".

Summary of Contents for FHA100AVEB8





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands