![background image](http://html1.mh-extra.com/html/daikin/fdxs25f2veb/fdxs25f2veb_installation-manual_2460399007.webp)
English
4
Mount chamber lid
and air filter
(accessory).
In case of bottom suction.
(1)Remove the chamber lid. (7 locations)
(2)Reattach the removed chamber lid in the
orientation shown in Fig.(7 locations)
(3)Attach sealing pad as shown in the figure
below. (Stored in outlet vent) (only for 50-60
type)
(In order to take in the air inside the ceiling,
and when not taking in air from outdoor air, it
is not necessary to stick.)
• Attach the sealing pad (accessory)
to the plate metal sections which
are not covered by anti-sweat
material.
• Make sure there are no gaps
between the different pieces of
sealing pad.
(4)Attach the hanger (right) insulation to the right hanger. (Stored in outlet vent)
(See the below figure for the sticking base line.)
(5)Attach the air filter (accessory) in the manner shown in the diagram.
(1)
(2)
Chamber lid
Air inlet
Air inlet
Air discharge
Air discharge
Chamber lid
(3)
For bottom intake type
(accessory)
(accessory)
Sealing pad (Large)
(accessory)
(accessory)
Sealing pad (Small)
Sealing pad (Large)
For rear intake type
Sealing pad (Small)
Anti-sweat material
included with the product
Anti-sweat material
included with the product
Air
discharge
Air
discharge
Air inlet
Air inlet
ARROW VIEW
Hanger bracket (right)
Slit
Hanger (right) insulation
Sticking base line
Attach the
filter to the
main unit
while
pushing
down on the
bends.
(2 bends for
25-35 type,
3 bends for
50-60 type)
In case of back side
In case of bottom side
Main unit
Force
Force
Filter