background image

English 

3

Be sure to earth the unit. 

• 

Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead. Imperfect earthing may 
result in electric shocks or fi re. 
A high surge current from lightning or other sources may cause damage to the air conditioner.
Be sure to install an earth leakage breaker.

• 

Failure to install an earth leakage breaker may result in electric shocks or fi re.
Consult the dealer if the air conditioner submerges owing to a natural disaster, such as a fl ood or typhoon.

• 

Do not operate the air conditioner in that case, otherwise a malfunction, electric shock, or fi re may result.
Do not start or stop operating the air conditioner with the power supply breaker turned ON or OFF.

• 

Otherwise fi re or water leakage may result. Furthermore, the fan will rotate abruptly if power failure com-
pensation is enabled, which may result in injury.
Do not use the product in the atmosphere contaminated with oil vapor, such as cooking oil or machine oil vapor.

• 

Oil vapor may cause crack damage, electric shocks, or fi re.
Do not use the product in places with excessive oily smoke, such as cooking rooms, or in places with 

• 

fl ammable gas, corrosive gas, or metal dust.
Using the product in such places may cause fi re or product failures.
Do not use fl ammable materials (e.g., hairspray or insecticide) near the product.

• 

Do not clean the product with organic solvents such as paint thinner.
The use of organic solvents may cause crack damage to the product, electric shocks, or fi re.
Be sure to use a dedicated power supply for the air conditioner.

• 

The use of any other power supply may cause heat generation, fi re, or product failures.
Ask our dealer or qualifi ed personnel to carry out installation work.

• 

Do not attempt to install the air conditioner yourself. Improper installation may result in water leakage, 
electric shocks or fi re.
Install the air conditioner in accordance with the instructions of this installation manual.

• 

Improper installation may result in water leakage, electric shocks or fi re.
Be sure to use only the specifi ed accessories and parts for installation work. 

• 

Failure to use the specifi ed parts may result in the unit falling, water leakage, electric shocks or fi re.
Install the air conditioner on a foundation strong enough to withstand the weight of the unit. 

• 

A foundation of insuffi cient strength may result in the equipment falling and causing injury.
Carry out the specifi ed installation work after taking into account strong winds, typhoons or earthquakes. 

• 

Failure to do so during installation work may result in the unit falling and causing accidents.
Make sure that a separate power supply circuit is provided for this unit and that all electrical work is carried 

• 

out by qualifi ed personnel according to local laws and regulations and this installation manual.
An insuffi cient power supply capacity or improper electrical construction may lead to electric shocks or fi re.
Make sure that all wiring is secured, the specifi ed wires are used, and that there is no strain on the terminal 

• 

connections or wires. 
Improper connections or securing of wires may result in abnormal heat build-up or fi re.
When wiring the power supply and connecting the wiring between the indoor and outdoor units, position the 

• 

wires so that the control box lid can be securely fastened. 
Improper positioning of the control box lid may result in electric shocks, fi re or overheating terminals. 
If refrigerant gas leaks during installation, ventilate the area immediately. 

• 

Toxic gas may be produced if the refrigerant comes into contact with fi re.
After completing installation, check for refrigerant gas leakage. 

• 

Toxic gas may be produced if the refrigerant gas leaks into the room and comes into contact with a source 
of fi re, such as a fan heater, stove or cooker.
Be sure to cut off the power supply before touching any electrical parts.

• 

Summary of Contents for FDM24PEVLK



















































Reviews: