Translation from original instructions
Packaged Rooftop
11
We reserve the right to make changes without any prior notice.
UATYA
4P645202-1
2.2 Basic rules
All the units are designed and built in compliance with Directive 2014/68/EU of the European Parliament and of the
Council of 15 May 2014 on the approximation of the laws of the Member States relating to pressure equipment.
To ensure maximum safety, in order to prevent possible risks, follow the instructions below:
- this product contains pressurised vessels, live components, moving mechanical parts and very hot and cold
surfaces that, in certain situations, can pose a risk: all maintenance work must be carried out by skilled personnel
equipped with the necessary qualifications in accordance with current regulations. Before carrying out any
operation, make sure that the personnel in charge has full knowledge of the documentation supplied with the unit.
- always have a copy of the documentation near the unit.
- The operations indicated in this manual must be integrated with the procedures indicated in the user instruction
manuals of the other systems and devices incorporated in the unit. The manuals contain all the necessary
information for safely managing the devices and the possible operating modes.
-
use suitable protection (gloves, hard hat, protective glasses, safety shoes, etc.) for all maintenance or control
operations carried out on the unit.
- Do not wear loose clothing, ties, chains, watches, etc., which can get caught in the moving parts of the unit.
-
always use tools and protective equipment in excellent condition.
- The compressors and delivery gas pipes are at high temperature. Therefore, when working in the immediate
vicinity, be careful to avoid touching any components of the unit without suitable protection.
- do not work in the discharge trajectory of the safety valves.
-
if the units are positioned in unprotected places which can easily be reached by unqualified persons, suitable
protection devices must be installed.
- the user must consult the installation and use system manuals, incorporated and attached to this manual.
- there may be potential risks that are not obvious. Warnings and signals are therefore displayed on the unit.
- Do not remove the warnings.
It is expressly forbidden to:
- remove or disable the safety guards;
-
tamper with and/or modify, even partially, the safety devices installed on the unit.
If there are alarm warnings and consequent tripping of the safety devices, the user must call in skilled maintenance
technicians to fix the problem immediately.
An accident can lead to serious injury or death.
The safety devices must be tested according to the guidelines in this manual.
The manufacturer does not assume any liability for damage/injury to persons, pets or objects arising from the re-use
of individual parts of the unit for functions or assembly situations different from the original ones. Tampering with/
unauthorised replacement of one or more parts of the unit is prohibited.
The use of accessories, tools or consumables other than those recommended by the Manufacturer relieves the latter
from civil and criminal liability.
Deactivation and scrapping of the unit must be carried out only by suitably trained and equipped personnel.
The units do not fall within the scope of Directive 2014/34/EU of the European Parliament and of
the Council, of 26 February 2014, on the approximation of the laws of the Member States relating to
equipment and protective systems intended for use in potentially explosive atmospheres.
Any operator gaining access to the unit must be authorised and qualified as specified by Annex HH
of IEC 60335-2-40:2018, by local legislations and, with respect to europen standards, by EN 378-4
and EN 13133 ", additionally, they must have proper knowledge to perform all the activities required
throughout the service life of the machine.
Summary of Contents for FC2
Page 2: ......
Page 55: ......
Page 56: ...Copyright 2020 Daikin 4P645202 1 UM_DKN_0001_Rooftop_EN_17 12 2020_rev00 ...
