background image

English

4

 Refer to figure 1 on page [1] 

The illustrations in this operating manual corre-
spond to the remote control format BRC1C type. 
Although the display and shape of the buttons on 
the BRC1B type are slightly different, they may be 
operated in the same manner.

5. NAME AND FUNCTION OF EACH 

SWITCH AND  DISPLAY ON THE 
REMOTE CONTROLLER 

1

ON/OFF BUTTON

Press the button and the system will start. Press 
the button again and the system will stop.

2

OPERATION LAMP (RED)

The lamp lights up during operation.

3

DISPLAY “

” (UNDER CENTRAL-

IZED CONTROL)

When this display shows, the system is 
UNDER CENTRALIZED CONTROL. 

4

DISPLAY “

” “

” “

” “

” “

”  

(OPERATION MODE)

This display shows the current OPERATION 
MODE.  For cooling only type, “

” (Auto) 

and “

”  (Heating) are not installed.

5

DISPLAY “

TEST

” (INSPECTION/TEST 

OPERATION)

When the INSPECTION/TEST OPERATION 
BUTTON is pressed, the display shows the 
system mode is in.

6

DISPLAY “

” (PROGRAMMED TIME)

This display shows the PROGRAMMED 
TIME of the system start or stop.

7

DISPLAY “

” (SET TEMPERATURE)

This display shows the set temperature.

8

DISPLAY “

” (FAN SPEED)

This display shows the set fan speed.

9

DISPLAY “

” (TIME TO CLEAN AIR FIL-

TER)

Refer to “HOW TO CLEAN THE AIR FILTER”.

10

DISPLAY “

” (DEFROST)

Refer to “DEFROST OPERATION”.

hr

hr

C

 Refer to figure 1 on page [1] 

Operating procedure varies with heat pump type 
and cooling only type. Contact your Daikin dealer 
to confirm your system type. 

To protect the unit, turn on the main power switch 
6 hours before operation.

If the main power supply is turned off during oper-
ation, operation will restart automatically after the 
power turns back on again.

11

NON-FUNCTIONING DISPLAY

If that particular function is not available, 
pressing the button may display the words 
“NOT AVAILABLE” for a few seconds.
When running multiple units simultaneously
The “NOT AVAILABLE” message will only be 
appear if none of the indoor units is equipped 
with the function. If even one unit is equipped 
with the function, the display will not appear.

12

TIMER MODE START/STOP BUTTON

Refer to “PROGRAM TIMER OPERATION”.

13

TIMER ON/OFF BUTTON

Refer to “PROGRAM TIMER OPERATION”.

14

INSPECTION/TEST OPERATION BUTTON

This button is used only by qualified service 
persons for maintenance purposes.

15

PROGRAMMING TIME BUTTON

Use this button for programming “START and/
or STOP” time.

16

TEMPERATURE SETTING BUTTON

Use this button for SETTING TEMPERA-
TURE.

17

FILTER SIGN RESET BUTTON

Refer to “HOW TO CLEAN THE AIR FILTER”.

18

FAN SPEED CONTROL BUTTON

Press this button to select the fan speed, 
HIGH or LOW, of your choice.

19

OPERATION MODE SELECTOR BUTTON

Press this button to select OPERATION 
MODE.

NOTE

For the sake of explanation, all indications are 
shown on the display in figure 1 contrary to 
actual running situations.

6. OPERATION PROCEDURE

01_EN_3P156215-3.fm  Page 4  Monday, February 7, 2005  12:18 PM

Summary of Contents for FBQ60BV1














Reviews: