18
Restoring factory settings
Maintenance and cleaning
7.2
Resetting and deleting the entire installa-
tion
During the reset, the DHC Access Point must be
connected to the cloud so that all data can be de-
leted. This means that the network cable must be
plugged in during the process and the LED must
light up blue continuously.
To reset the factory settings of the entire installation, the
DHC Access Point must be reset twice in succession, with-
in 5 minutes:
1. Reset the DHC Access Point as previously de-
scribed.
2. Wait at least 10 seconds until the LED permanently
lights up blue.
3. Immediately afterwards, perform the reset for the
second time by disconnecting the DHC Access
Point from the power supply again and repeating
the necessary steps.
» After the second restart, your system will be reset.
If the DHC Access Point is still visible in the app
(status offline), you have to manually remove it.
To do so, proceed as follows:
1. Click on the plus symbol (+).
2. Select the menu item
Add Daikin Home Controls
.
3. Check if your DHC Access Point is in the list.
4. Select
Remove
.
» Your DHC Access Point has been removed from
the app.
8
Maintenance and cleaning
The accessory does not require you to carry out
any maintenance. Enlist the help of an expert to
carry out any repairs.
Clean the accessory using a soft, lint-free cloth that is clean
and dry. You may dampen the cloth a little with lukewarm
water in order to remove more stubborn marks. Do not use
any detergents containing solvents, as they could corrode
the plastic housing and label.
