Daikin DCS002A71, Operation Manual

Page: 5 / 16

English 4
5-2 How to set Exclusion Periods (Normal Type)
This function is only for normal type, and exclusion periods where power proportional distribution calculation is not carried out and
week days can be set. For example, it can be used when to collect fixed charges during day time in week days and carry out power
proportional distribution calculation only for overtime work and holiday work. Time zone can be set per week day. By the way, this setup
is of all systems, and it is impossible to make different settings in unit of zone.
[The numeric keyboard]
[How to set End Time]
When end time is set at 24:00 (at midnight),
enter 00:00.
When Exclusion Periods is set in the above setup, the following
setting contents appear.
CAUTION
When end time is set over 24:00, it is considered it is set from
0:00 of the day.
Press Exclusion Periods
(Normal Type).
4
. When to end setup, press OK button.
1
. How to set Begin Time
Press Begin button of the week day you want to
set, and set the begin time in exclusion periods
where power proportional distribution calculation
is not carried out.
∗
The numeric keyboard appears. Set Begin Time.
2
. How to set End Time
Press End button of the week day you want to
set, and set the end time in exclusion periods
where power proportional distribution
calculation is not carried out.
∗
The numeric keyboard appears. Set End Time.
3
. How to cancel time setting
When to cancel Exclusion Periods
where power proportional distribution
calculation is not carried out , press
Disabled button.
5
. When to cancel setup, press Cancel button.
(Settings remain same as previous.)
Fri. Tue. Wed. Thu.
08:30 17:00 08:30
19:30
Exclusion Periods
Power
proportional
distribution
Power
proportional
distribution
Power
proportional
distribution
Power proportional
distribution
Sun. Mon. Tue.
22:00 07:00
Ex.)
22:00
End time
7:00 Mon.
Exclusion Periods
Begin time
01_EM06A043_EN.fm Page 4 Monday, October 16, 2006 11:25 AM