Daikin DCS002A71, Operation Manual

Page: 4 / 16

3 English
3. PREPARATION
3-1 Checking Attachments
Power Proportional Distribution Card includes the following
attachments.
3-2 How to Connect
To distribute power proportionally, a test run must be performed
for the main controller.
Contact your dealer before use.
4. SIMPLIFIED CHART
CAUTION
As for how to set current clock time, refer to the manual
attached to intelligent Touch Controller.
5. INITIAL SETUP
5-1 Power Proportional Distribution Main Menu
Settings of power proportional distribution is made via the sys-
tem setup menu.
To display the system setup menu, press the S button at the
bottom on the screen.
NOTE
• Before initial setup, be sure to set the current clock time.
Software ID LIMITED
WARRANTY
Power proportional
distribution main menu
• Exclusion Periods (Normal Type)
• Special Calculation Days (Normal Type)
• Power Proportional Distribution Report
See page [4]
• Case to time limit set up
• Case to designate month
• Display in unit of indoor unit
• Display in unit of zone
• Total sum display
See page [5]
See page [6]
See page [6]
See page [7]
See page [7]
See page [7]
Press S button of the
fundamental screen.
When the S button is pressed,
the screen shown below
will appear.
Press “Pwr Prp Dist” in the
system setup menu to display
it inverted, and then press
Execute button.
To set Exclusion Periods
(Normal Type), press this
button on the screen. To set Special Calculation
Days (Normal Type), press
this button on the screen.
To get back to the
previous screen,
press this button
on the screen.
To set Power
Proportional Distribution
Report, press this button
on the screen.
01_EM06A043_EN.fm Page 3 Monday, October 16, 2006 11:25 AM