![background image](http://html1.mh-extra.com/html/daikin/dar09/dar09_service-instructions-manual_4699353010.webp)
10
PRODUCT IDENTIFICATION
DX13SA*
Model/Rev
Description
DX13SA0[18-60]1AA
Introduction of Daikin 1.5 ton 13 SEER R-410A Condensers conversion to 23" chassis for
the 1.5 - 3 ton models.
DX13SA0[18-61]1AB
DX13SA0[36, 48, 60]3AB
DX13SA0[48-60]4AB
One hairpin removed (one hole at the top of the coil and one hole at the bottom of the coil
will remain open). No change in coil circuits.
DX13SA0611
Introduction of Daikin 13 SEER R-410A Condensers that supplement our current 5 ton
models.
DX13SA0[42-60]1
DX13SA0[36, 48, 60]3
DX13SA0[48-60]4
Changed from current four piece louver assembly to a two-piece louver plus a corner post
on 26" and 29" chassis.
DX13SA0[18-24]1AC
DX13SA0[36/48]3AC
DX13SA0[48/60]4AC
Refrigerant quantity reduction.
DX13SA0364AA
Introduction of Daikin 13 SEER R-410A 3 Ton with 460V Compressor
DX13SSA0363AD
Change from copper wound motor to aluminum wound motor
DX13SA0361AC
Refrigerant charge reduction
DX13SA0603AC
DX13SA0604AD
Switching current Daikin units with vertical louvers to be consistent with other units having
horizontal louvers.
DX13SA0484AD
DX13SA0604AE
Replacing Motor 0131M00022 (Regal) to 0131M00783 (Nidec) where ever used.
DX13SA0364AB
Create new Motor & Replace 0131M00023 with 0131M00784
DX13SA0[42,48,60,61]1AC
DX13SA0603AD
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DX13SA0[18,24,36,42,48,60]1AD
DX13SA0301AC
Factory Refrigerant Charge Optimization
DX13SA0[18,24]1AE
DX13SA0301AD
Replaced motor 0131M000266 with 0131M00811
DX13SA0361AE
DX13SA0483AD
Replaced motor 0131M00018P with 0131M00813
DX13SA0421AE
Change from copper wound compressor motor to aluminum wound compressor motor.
ZP34K5EPFV130 and ZP36K5EPFV130.
DX13SA
D
aikin
®
BRAND
X-
R410A
13
SEER
S
INGLE STAGE
A-
BASE UNIT CONDENSERS
Summary of Contents for DAR09
Page 59: ...59 SERVICING Table 1 Quick Reference Table...
Page 81: ...81 AIRHANDLERS...
Page 96: ...96 REM OTE SPLITS...