![background image](http://html1.mh-extra.com/html/daikin/ctkb25tvmg/ctkb25tvmg_operation-manual_2460466008.webp)
7
Read Before Operation
Read Before Operation
Names of Parts
NOTE
Notes on the Wireless LAN connecting adapter
• Do not use this product near a microwave oven. (This can affect Wireless LAN communications.)
• For the latest details about installation of the Wireless LAN connecting adapter and applicable units, refer to the web site
http://www.daikinthai.com/product/dmobile
.
[1] The RUN lamp LED can be disabled via the mobile application
• Make sure the controller is connected to the Wireless LAN adapter and RUN lamp is lit.
To turn off the RUN lamp via the mobile application.
1) Open “DAIKIN Mobile Controller” in your smartphone or tablet.
2) Select “Setting” or icon “
”.
3) Select “Adapter LEDs” and turn it off.
• The RUN lamp turns off.
• Mobile controller continues operating.
Specifi cations
Frequency range
2400 MHz−2483.5 MHz
Radio protocol
IEEE 802.11b/g/n
RF channel
1−13
Power supply
DC 14 V / 100 mA
RF channel: Radio frequency channel
Confi guration
• The user is responsible for providing the following items before using this product:
Smartphone or tablet PC (Supported OS: Android 2.3.3 or later; iOS 5.0 or later.)
Internet line and communicating device (Modem/router or similar device)
Wireless LAN access point
Application name: [DAIKIN Mobile Controller] (free)
For details on the installation method for the DAIKIN Mobile Controller application, please see
Page 27
Wireless LAN connecting adapter
(The product is inside the indoor unit and may be different depending on the air conditioner model type)
CAUTION
• In case the Wireless LAN connecting adapter is optional (CTKB model), it must be installed by your dealer or a technician.
(Installing it by yourself could cause electric shock or fi re.)
ATTENTION
• When the Wireless LAN connecting adapter is operated, the RUN lamp may light through the front panel. If you fi nd the lamp disturbing,
the lamp can be disabled via the mobile application
[1]
.
RUN lamp
[1]
(orange) lights
when connecting to a router
(Wireless LAN access point).
AP lamp*
MODE button*
POWER button*
SETUP button
Use when connecting to a router
(Wireless LAN access point).
* No operation for BRP072C42 model.
01_EN_3P440286-3D.indd 7
30-Apr-19 11:16:09 AM