Daikin CTKB25TVMG, Operation Manual

Page: 24 / 40

23
TIMER Operation TIMER Operation
WEEKLY TIMER Operation
6.
Press to select the desired time.
• The time can be set between 0:00 and 23:50 in 10-minute intervals.
• To return to the ON/OFF TIMER mode setting, press
.
• Proceed to
STEP
9
when setting the OFF TIMER.
7.
Press .
• The time will be set.
• “
” and the temperature blink.
8.
Press to select the desired temperature.
• The temperature can be set between 10°C and 32°C.
COOL: The unit operates at 18°C even if it is set to 10 to 17°C.
Page 12
• To return to the time setting, press .
• The set temperature is only displayed when the mode setting is on.
9.
Press .
• The temperature will be set and go to the next reservation setting.
• The temperature is set while in ON TIMER operation, and the time is set while in OFF
TIMER operation.
• The next reservation screen will appear.
• To continue further settings, repeat the procedure from
STEP
4
.
10.
Press to complete the setting.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and blinking of the OPERATION lamp.
• “ ” appears on the LCD and WEEKLY TIMER operation is activated.
• The TIMER lamp lights orange.
Display
• A reservation made once can be easily copied and the same settings used for another
day of the week. Refer to
Copy mode
.
Page 24
NOTE
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller fi rst. Page 11
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with the WEEKLY TIMER.
Other settings for the ON TIMER are based on the settings just before the operation.
• WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set while
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and “ ” will disappear from the LCD. When the ON/
OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Only the time and set temperature with the WEEKLY TIMER are sent with the . Set the WEEKLY TIMER only after setting the operation
mode, the airfl ow rate and the airfl ow direction ahead of time.
• Turning off the circuit breaker, power failure, and other similar events will render operation of the indoor unit’s internal clock inaccurate. Reset
the clock. Page 11
• can be used only for the time and temperature settings. It cannot be used to go back to the reservation number.
01_EN_3P440286-3D.indd 23 30-Apr-19 11:16:49 AM