Daikin ComfortNet DX7TC, Service Instructions Manual

Page: 21 / 122

21
ACCESSORIES
DX16TC / DX18TC
Model Description
DX16TC024 DX16TC036 DX16TC048 DX16TC060 DX18TC024 DX18TC036 DX18TC048 DX18TC060
ABK-20 Anchor Bracket Kit X X X X X X X X
TX2N4A TXV Kit
X
X
TX3N4 TXV Kit
X X
TX5N4 TXV Kit
X X X X
CSR-U-1 Hard-start Kit
X
X
CSR-U-2 Hard-start Kit
X X
CSR-U-3 Hard-start Kit
X X X X
FSK01A2 Freeze Protection Kit
X X X X
X
X X X
LSK02*
Liquid Line Solenoid
Valve
X X X X X X X X
OT18-60A3
Outdoor Thermostat/
Lockout Thermostat
X X X X X X X X
B1141643 24V Transformer
X X X X
X
X X X
*Contains 20 brackets; four brackets needed to anchor unit to pad
2
Installed on the indoor coil
4
This component is included in the
CTK0***
communicating thermostat kit.
1
Field-installed, non-bleed, expansion valve kit - Condensing units and heap pumps with reciprocating compressors require the use
of start-assist components when used in conjunction with an indoor coil using a non-bleed thermal expansion valve refrigeran
3
Available in 24V legacy mode only. This feature is integrated in the communicating mode. Required for heat pump applications
where ambient temperature fall below 0 °F with 50% or higher relative humidity.
DZ16TC / DZ18TC
Model Description DZ16TC024 DZ16TC036 DZ16TC048 DZ16TC060 DZ18TC024 DZ18TC036 DZ18TC048 DZ18TC060
ABK-20 Anchor Bracket Kit X X X X X X X X
TX2N4A TXV Kit
X X
TX3N4 TXV Kit
X X
TX5N4 TXV Kit
X X X X
CSR-U-1 Hard-start Kit
X X
CSR-U-2 Hard-start Kit
X X
CSR-U-3 Hard-start Kit
X X X X
FSK01A2 Freeze Protection Kit
X X X X X X X X
LSK02*
Liquid Line Solenoid
Valve
X X X X X X X X
OT18-60A3
Outdoor Thermostat/
Lockout Thermostat
X X X X X X X X
B1141643 24V Transformer X X X X X X X X
*Contains 20 brackets; four brackets needed to anchor unit to pad
2
Installed on the indoor coil
4
This component is included in the
CTK0***
communicating thermostat kit.
1
Field-installed, non-bleed, expansion valve kit - Condensing units and heap pumps with reciprocating compressors
require the use of start-assist components when used in conjunction with an indoor coil using a non-bleed thermal
expansion valve refrigeran
3
Available in 24V legacy mode only. This feature is integrated in the communicating mode. Required for heat pump
applications where ambient temperature fall below 0 °F with 50% or higher relative humidity.