background image

3P257556-2A        English

2

3.  Accessory

Check that the following accessories provided with the air 
conditioner are correct in number. See the following illustration, 
which shows where the accessories are kept.

Backside of the protective 

corrugated cardboard

A set of accessories
The accessories are 

on the backside of the 

protective corrugated 

cardboard under 

the suction grille.

Suction grille

Name

Spacer 

(1)

Flexible 

hose (2)

S-shaped 

pipe (3)

Harness (4)

Clamp 

(5)

Quantity

1 pc.

1 pc.

1 pc.

1 pc.

2 pcs.

Shape

Name

Seal (6)

Others

Quantity

1 pc.

Shape

 

Operation manual

 

Installation manual

Pay the utmost attention to the following items when 
conducting installation work, and recheck the items on 
completion of the work.

a.  Test items on completion of work

Test items

In case of failure Result

Is the air conditioner free of wiring and 
connection mistakes or omissions?

Operation failure 

and wire burnout

Are you sure that there is no space 
between the ceiling and ceiling material?

Water leakage

Are the fixing knobs (in 2 points) of the 
dust box secured tightly?

Vibration, noise, 

and dust 

collection failure

Are the fixed knobs (in 5 points) of the 
air filter secured tightly?

Vibration, noise, 

and dust 

collection failure

Is the fall prevention cord for the dust 
box and grille hooked to the mounting 
bracket?

Fall

Did you attach the control box cover, 
dust box, flexible hose, S-shaped pipe, 
suction grille, and decoration corner 
covers?

Noise and dust 

collection failure

 

* Be sure to recheck the items provided in the section "1. Safety 

Considerations" on page i.

b. Test items before delivery

Test items

Result

Was the test operation of the air conditioner finished?
Did you explain the operation method of the air 
conditioner to the customer while showing the customer 
the operation manual? *
Did you make mode settings for filter auto-cleaning 
(automatic control operation settings or timer operation 
settings with an operation time zone specified) and 
provide information on the set mode operation of the air 
conditioner to the customer?
Did you deliver the operation manual to the customer? 
(Be sure to hand the customer the operation manual as 
well as the installation manual.)

 

*

Point of operation explanation

In addition to the general usage of the air conditioner, it is 
necessary to explain the descriptions of the 

 WARNING and 

 CAUTION marked items in the operation manual and have 

the customer read the descriptions carefully, because these 
items indicate information that, if not heeded, is likely to result in 
loss of life, serious injury, or property damage.

4.  Installation Site

This product offers selectable air outlet directions. A closure kit (an 
optional accessory) is required to achieve three-way flow patterns. 
Two-way flow patterns are not available to this product.

4-1  Select the installation site that meets the 

following conditions with the consent of the 

customer

 

The surface of the ceiling is not inclined.

 

Installation and service workspace is secured (see the following 
illustrations).

 

The panel indicators are seen with ease.

 

The indoor and outdoor units, power cord, transmission wiring, 
and remote controller wiring are at least 1 m away from TV or 
radio sets. 
(The above is for the prevention of TV and radio interference. 

Depending on the incoming signal strength, a distance of 1 m 

may not be sufficient to eliminate noise.)

3P257556-2A.indb   2

12/16/2013   4:27:53 PM

Summary of Contents for BYCQ125BGW1

















Reviews: