English
12
TIMER MODE START/
STOP
Press the TIMER MODE START/STOP
BUTTON several times and select the
mode on the display.
The display flashes.
For setting the timer stop .... “
”
For setting the timer start .... “
”
PROGRAMMING TIMER
Press the PROGRAMMING TIMER
BUTTON and set the time for stopping
or starting the system.
When this button is pressed, the
time advances by 1 hour.
When this button is pressed, the
time goes backward by 1 hour.
•
Keep pressing the button to change the
setting time continuously.
•
The timer can be programmed a maximum
of 72 hours.
TIMER RESERVE
Press the TIMER RESERVE BUTTON.
The timer setting procedure ends.
The display changes from flashing light to a
constant light.
TIMER CANCEL
Press the TIMER CANCEL BUTTON to
cancel
programming.
The display vanishes.
•
Make sure that the receiving tone of the
indoor unit makes a beeping sound. If the
receiving tone does not sound, set the
timer using steps
to
, and then
press the TIMER CANCEL BUTTON.
1
TIMER
2
DOWN
UP
DOWN
UP
3
RESERVE
4
CANCEL
1
3
For example.
When the timer is
programmed to stop
the system after 3
hours and start the
system after 4
hours, the system
will stop after 3
hours and then 1
hour later the sys-
tem will start.
NOTE
•
After the timer is programmed, the display
shows the remaining time.
When the remote controller does not work
due to battery failure or the absence thereof,
use this switch which is located beside the
discharge grille on the main unit. When the
remote controller does not work, but the bat-
tery low indicator on it is not lit, contact your
dealer.
[START]
Press the EMERGENCY OPERA-
TION SWITCH.
•
The machine runs in the previous mode.
•
The system operates with the previously
set fan speed.
This display is located next to the air outlet of
the indoor unit. (Refer to Fig. 2 on page [1])
EMERGENCY OPERATION
MODE
TIMER
RESERVE CANCEL
DOWN
UP
FAN
TIME
TEMP
ON OFF
C
hr.
hr.
1
1 2
01_EN_3P302565-1.fm Page 12 Monday, February 13, 2012 4:09 PM