![background image](http://html.mh-extra.com/html/daikin/atxs20k2v1b/atxs20k2v1b_operation-manual_501401023.webp)
22
ON TIMER Operation
■
To use ON TIMER operation
•
Check that the clock is correct.
If not, set the clock to the present time.
Page 10
1.
Press
.
• “
” is displayed on the LCD.
• “
” blinks.
• “
” and day of the week disappear from the LCD.
2.
Press until the time setting reaches the
point you like.
•
Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
again.
• “
” and setting time are displayed on the LCD.
•
The TIMER lamp lights yellow.
Page 5
Display
■
To cancel ON TIMER operation
Press
.
• “
” and setting time disappear from the LCD.
• “
” and day of the week are displayed on the LCD.
•
The TIMER lamp goes off.
■
To combine ON TIMER and OFF TIMER
•
A sample setting for combining the 2 timers is shown below.
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00 Combined
NOTE
■
In the following cases, set the timer again.
•
After a breaker has turned off.
•
After a power failure.
•
After replacing batteries in the remote controller.
Summary of Contents for ATXS20K2V1B
Page 43: ...42 ...
Page 44: ...Quick reference 3P377621 3B 2014 08 Copyright 2014 Daikin ...