![background image](http://html.mh-extra.com/html/daikin/atxs20k2v1b/atxs20k2v1b_operation-manual_501401035.webp)
34
1.
Take off the titanium
apatite photocatalytic air-
purifying filter.
•
Open the front panel and pull out the air filters.
•
Hold the recessed parts of the frame and unhook
the 4 claws.
Claw
2.
Clean or replace the titanium
apatite photocatalytic air-
purifying filter.
[Maintenance]
2-1
Vacuum dusts, and soak in cold or
lukewarm water (avoid using warm
or hot water) for about 10 to
15 minutes if dirt is heavy.
•
Do not remove the filter from frame when
washing with water.
2-2
After washing, shake off remaining
water and dry in the shade.
•
Since the material is made out of polyester, do
not wring out the filter when removing water
from it.
[Replacement]
Remove the filter from the
filter frame and attach a
new one.
•
Do not throw away the filter frame. Reuse the
filter frame when replacing the titanium apatite
photocatalytic air-purifying filter.
•
Dispose of the old filter as non-flammable waste.
3.
Set the filters as they were
and close the front panel.
•
Press the front panel at both sides and the
center.
NOTE
•
Operation with dirty filters:
– cannot deodorize the air,
– cannot clean the air,
– results in poor heating or cooling,
– may cause odour.
•
Dispose of old filters as non-flammable waste.
•
To order titanium apatite photocatalytic air-purifying
filter contact to the service shop there you bought the
air conditioner.
Item
Titanium apatite photocatalytic
air-purifying filter (without frame) 1 set
Part No.
KAF970A46
■
Titanium apatite photocatalytic air-purifying filter
Summary of Contents for ATXS20K2V1B
Page 43: ...42 ...
Page 44: ...Quick reference 3P377621 3B 2014 08 Copyright 2014 Daikin ...