5
|
About the units and options
Installer reference guide
30
EPRA08~W1 + ETBH/9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03
PC cable (EKPCCAB4)
The PC cable makes a connection between the switch box of the indoor unit and a
PC. It gives the possibility to update the software of the indoor unit.
For installation instructions, see the installation manual of the PC cable.
Heat pump convector (FWX*)
For providing space heating/cooling, it is possible to use the following heat pump
convectors:
▪
FWXV: floor-standing model
▪
FWXT: wall-mounted model
▪
FWXM: concealed model
For installation instructions, see:
▪
The installation manual of the heat pump convector
▪
The installation manual of the heat pump convector options
▪
The addendum book for optional equipment
WLAN module (BRP069A71)
A WLAN cartridge (to be plugged into the MMI) is delivered as indoor unit
accessory. Alternatively (e.g. in case of weak signal strength), you can install the
optional wireless LAN module BRP069A71.
For installation instructions, see the installation manual of the WLAN module and
the addendum book for optional equipment.
Universal centralised controller (EKCC8-W)
Controller for cascade control.
Bizone kit (EKMIKPOA or EKMIKPHA)
You can install an optional bizone kit.
For installation instructions, see the installation manual of the bizone kit.
See also:
▪
"6.2.3 Multiple rooms – Two LWT zones"
▪
Connection kit for third‑party tank (EKHY3PART)
Required when connecting a third-party tank to the system.
Contains a thermistor, a 3-way valve, and a contactor K3M – terminal X7M
assembly.
For installation instructions, see the installation manual of the connection kit.
Domestic hot water tank
For providing domestic hot water, a domestic hot water tank can be connected to
the wall-mounted indoor unit.
The following domestic hot water tanks are available:
Summary of Contents for Altherma 3 H MT W
Page 294: ...13 13...
Page 295: ......
Page 296: ...4P634885 1 2021 03 Copyright 2021 Daikin Verantwortung f r Energie und Umwelt...
