background image

4 Operation

Operation manual

4

ADEQ35~125C2VEB

Split system air conditioners

4P461580-1 – 2016.09

g

Drain pipe

h

Earth wire to ground outdoor unit to prevent electric
shocks.

NOTICE

Never press the button of the remote controller with a hard,
pointed object. The remote controller may be damaged.

NOTICE

Never pull or twist the electric wire of the remote controller.
It may cause the unit to malfunction.

CAUTION

Never touch the internal parts of the controller.

Do  not  remove  the  front  panel.  Some  parts  inside  are
dangerous  to  touch  and  appliance  problems  may  happen.
For checking and adjusting the internal parts, contact your
dealer.

NOTICE

Do  not  wipe  the  controller  operation  panel  with  benzine,
thinner,  chemical  dust  cloth,  etc.  The  panel  may  get
discoloured  or  the  coating  peeled  off.  If  it  is  heavily  dirty,
soak  a  cloth  in  water-diluted  neutral  detergent,  squeeze  it
well  and  wipe  the  panel  clean.  Wipe  it  with  another  dry
cloth.

4

Operation

4.1

Operation range

Use the system in the following temperature and humidity ranges for
safe and effective operation.

AZQS-B

Cooling

Heating

Outdoor temperature

–5~46°C DB

–15~15.5°C WB

Indoor temperature

14~28°C WB

10~27°C DB

Indoor humidity

≤80%

(a)

ARXS-L

Cooling

Heating

Outdoor temperature

10~46°C DB

–15~18°C WB

Indoor temperature

14~28°C WB

10~30°C DB

Indoor humidity

≤80%

(a)

(a)

To avoid condensation and water dripping out of the unit. If
the temperature or the humidity is beyond these conditions,
safety devices may be put in action and the air conditioner
may not operate.

The setting temperature range of the remote controller is:

Cooling

Heating

17~32°C

16~31°C

4.2

Operation procedure

▪ Read  the  documentation  supplied  with  the  remote  controller

carefully  before  operating  to  ensure  the  best  possible
performance.

▪ Turn  on  the  power  at  least  6  hours  before  operating  the  unit  in

order  to  ensure  smoother  operation.  As  soon  as  the  power  is
turned on, the remote controller display appears.

▪ If  there  was  a  power  failure  during  operation,  the  system

automatically  restarts  immediately  after  the  power  supply  is
recovered.

▪ Set the temperature range of the remote controller is described in

chapter "Operation range".

▪ If  you  select  a  function  which  is  not  available,  the  message  NOT

AVAILABLE appears on the remote controller.

▪ The  operation  procedure  depends  on  the  model  (heat  pump  or

cooling only). Contact your dealer to confirm which model you are
using.

5

Energy saving and optimum
operation

NOTICE

Do not use the system for other purposes. In order to avoid
any  quality  deterioration,  do  not  use  the  unit  for  cooling
precision instruments, food, plants, animals or works of art.

CAUTION

Do not operate the system when using a room fumigation-
type  insecticide.  This  could  cause  the  chemicals  to
become  deposited  in  the  unit,  which  could  endanger  the
health of those who are hypersensitive to chemicals.

6

Maintenance and service

6.1

Overview: Maintenance and
service

The installer has to perform a yearly maintenance.

Refrigerant

This  product  contains  fluorinated  greenhouse  gases.  Do  NOT  vent
gases into the atmosphere.

Refrigerant type: R410A

Global warming potential (GWP) value: 2087.5

NOTICE

Maintenance  must  be  done  by  an  authorised  installer  or
service agent.

We  recommend  to  do  maintenance  at  least  once  a  year.
However,  applicable  legislation  might  require  shorter
maintenance intervals.

CAUTION

Before  accessing  terminal  devices,  make  sure  to  interrupt
all power supply.

DANGER: RISK OF ELECTROCUTION

To  clean  the  air  conditioner  or  air  filter,  be  sure  to  stop
operation  and  turn  all  power  supplies  off.  Otherwise,  an
electric shock and injury may result.

WARNING

To prevent electric shocks or fire:

▪ Do NOT rinse the unit.

▪ Do NOT operate the unit with wet hands.

▪ Do NOT place any objects containing water on the unit.

CAUTION

After  a  long  use,  check  the  unit  stand  and  fitting  for
damage. If damaged, the unit may fall and result in injury.

Summary of Contents for ADEQ100C2VEB









Reviews: