22
IM 1167
Physical Data (non-VFD)
Table 17: Physical Data (60 Hz, High Efficiency, non-VFD models)
CIRCUIT 1
CIRCUIT 2
CIRCUIT 1
CIRCUIT 2
CIRCUIT 1
CIRCUIT 2
Unit Cap. @ AHRI tons (kW)
Unit Operating Charge lbs (kg)
160 (73)
160 (73)
180 (82)
180 (82)
180 (82)
180 (82)
Unit Dimensions
L x W x H, in. (mm)
Unit Operating Weight, lbs. (kg)
Unit Shipping Weight, lbs (kg)
Weight-Add for Copper Fins, lbs (kg)
Weight-Add for Louvered Panels, lbs (kg)
Weight-Add for Sound Enclosures, lbs (kg
Weight-Add for PFCC option, lbs (kg)
Nominal Capacity, tons (kW)
105 (369)
105 (369)
105 (369)
125 (439)
125 (439)
125 (439)
Minimum Capacity (% of Full Load)
Oil charge per circuit , gallons (liters)
4.5 (17)
4.5 (17)
4.5 (17)
5.5 (21)
5.5 (21)
5.5 (21)
Pumpdow n Capacity, lbs (kg)
250 (113)
250 (113)
291 (132)
291 (132)
291 (132)
291 (132)
Coil Inlet Face Area, sq. ft. (sq. m.)
147.7 (13.7)
147.7 (13.7)
172.3 (16.0)
172.3 (16.0)
172.3 (16.0)
172.3 (16.0)
Row s Deep/Fins Per Inch
3 / 16
3 / 16
3 / 16
3 / 16
3 / 16
3 / 16
Number of Fans per Circuit
Fan Diameter: 31.5 in. (800 mm)
Fan Motor, hp (kW)
Fan & Motor RPM
Fan Tip Speed, fpm (m/s)
Airflow , cfm (l/s)
Shell Dia.-Tube Length, in.(mm)
Water Volume, gallons (liters)
Victaulic inlet/outlet conn. in. (mm)
Max. Water Pressure, psi (kPa)
Max. Refrigerant Press., psi (kPa)
BASIC DATA
COMPRESSORS, SCREW, SEMI-HERMETIC
CONDENSERS, HIGH EFFICIENCY FIN AND TUBE TYPE
Data
AWS210BDH
AWS230BDH
AWS250BDH
15282 (6932)
205.7 (723)
225.2 (792)
240.6 (846)
245 x 88 x 100
280 x 88 x 100
280 x 88 x 100
15
788 (357)
900 (408)
(6220 x 2225 x 2548)
(7121 x 2225 x 2548)
14622 (6633)
(7121 x 2225 x 2548)
13653 (6193)
15165 (6879)
15825 (7179)
7
7
7
1876 (851)
2084 (945)
2084 (945)
477 (216)
477 (216)
15
15
CONDENSER FANS, DIRECT DRIVE PROPELLER TYPE
1.4 (1.05)
1.4 (1.05)
1.4 (1.05)
850
850
850
6
6
7
6984 (35)
6984 (35)
6984 (35)
133020 (62778)
155190 (73241)
155190 (73241)
16 x 108 / (406 x 2750)
16 x 108 / (406 x 2750)
16 x 108 / (406 x 2750)
66 (251)
64 (243)
64 (243)
6 (168)
6 (168)
6 (168)
152 (1048)
152 (1048)
152 (1048)
325 (2241)
325 (2241)
325 (2241)
EVAPORATOR, DIRECT EXPANSION SHELL AND TUBE
477 (216)
13110 (5947)
160 (73)
160 (73)
160 (73)
900 (408)
Note: A 20 mesh strainer must be placed in the supply water line just prior to the inlet of the evaporator.
Care must be exercised when welding pipe or flanges to the evaporator to prevent any slag from entering the vessel.
This information applies only to Rev 0B models of AWS-B. For Rev 00 models, consult CAT 600-6; Rev 0A, CAT 600-7.